automatic arc welding

用法例句

A digital controller design for submerged arc welding;

埋弧自动焊数字控制器设计

For welding boiler header with thick wall,gas tungsten arc welding is adopted for backing welding with a special welding wire,and shielded metal arc welding is used for transition welding and SAW( submerged arc welding) is used for filler welding and cosmetic welding.

对厚壁集箱的焊接采用特殊焊丝进行手工钨极氩焊打底,为了增加焊缝金属厚度,采用焊条电弧焊过渡,最后用埋弧自动焊填充盖面,改善了焊工的劳动条件。

Usage and maintenance of welding and cutting machines(69)——Installation and use of automatic arc welder;

焊接与切割设备的使用和维修(六十九)——自动弧焊机安装与使用

Aiming at the problems,such as deformed-weld surface and interior incomplete fusion,which occurred in testing the technology of high-pressure pipes with submerged arc automatic welding in Repairing and Fabrication Plant of Hebei No.

针对河北省电力建设第二工程公司修造厂在进行高压管道埋弧自动焊焊接试验时遇到的焊缝成型差、内部未熔合等问题进行了原因分析,并对有关焊接设备实施了一系列改造。

This article analysis and study the welding capability for the stainless steel low temperature pressure vessel, at end adopt the high efficiency submerged arc automatic welding to welding the stainless steel low temperature pressure vessel.

本文通过对不锈钢做为低温容器用钢的焊接性进行了分析、研究,并制作了焊接工艺评定,最终采用了高效的埋弧自动焊进行了不锈钢低温容器的焊接。

Double wire automatic submerged arc welding is a welding method with high melt applying speed rate,high welding speed,low heat input.

单电源双丝埋弧自动焊是一种高熔敷速率、高焊接速度、低热输入的埋弧焊方法。

This article introduced the automatic submerged arc welding procedure of 15MnNbR and provided the discussion conclusion about the performance test between the welded joint.

就15MnNbR之间的埋弧自动焊焊接工艺进行介绍,对焊接接头的力学性能进行了试验,并对性能试验结果作了简单的讨论。

The submerged arc welding(SAW) craft(WPS017) and shielded metal arc welding(SMAW) craft(WPS016 and WPS016A) were designed for S355ML steel with thickness of 65 mm.

笔者对65 mm厚S355ML钢板,编制自动埋弧焊(WPS017)工艺和手工电弧焊(WPS016,WPS016A)工艺,对其焊接接头进行常温(15℃)和低温(-20℃)裂纹尖端张开位移(CTOD)评定。

Andlysis on the crack produced in automatic submerged arc welding test of the high-toughness refractory and weather-resistance construction steel WGJ510C2 newly developed in Wuhan Steel was taken by means of optical microscope, electron probe, and transmission electron microscope.

利用光学显微镜、电子探针和透射电镜对武钢研制成功的高性能耐火耐候建筑用钢WGJ510C2在工业性自动埋弧焊(SAW)焊接工艺评定试验中所产生的裂纹进行了讨论和分析。

stick feeder machine

焊丝进给自动弧焊机

Research of Integrated Application Environment for Automatic Arc-welding Robot for Wire-drawing Bushing;

拉丝漏板自动弧焊机器人集成应用环境开发

semi-auto CO2 arcway welder

半自动c02弧焊机

automatic submerged slag welding of rail

钢轨自动埋弧电弧焊

narrow gap one-side automatic welding

窄间隙单面自动电弧焊

controlled tungsten-arc welding

自动控制弧长的钨极电弧焊

STUDY ON THE AUTOMATIC REGULATION OF TIG WELDING ARC-LENGTH

钨极氩弧焊弧长自动调节装置的研究

flash butt-welding machine, electric, automatic or semi automatic

电动电弧对焊机,自动或凌晨自动式

Plasma-arc welding (PAW) may be used for hard surfacing, overlaying and fully automatic butt welding.

等离子弧焊可用于敷焊硬合金表面、堆焊和全自动对接焊。

Welding Technique of Automatical Hidden Arc Overlay Welding for Matching Surface Between Bell and Hopper of Blast Furnace

高炉料钟、料斗配合表面自动埋弧堆焊焊接工艺

STUDY ON THE SOLDER WIRE FOR SUBMERGED-ARC AUTOMATIC WELDING OF 15MnVN_q BRIDGE STEEL

15锰钒氮桥梁钢埋弧自动焊焊接材料的研究

Applying Automatic Submerged Arc welding for Heavy Calibre Steel Pipe

埋弧自动焊在大口径钢卷管焊接上的应用

Welding Technology of Duplex Stainless Steel Air-cooler's Shoe Automatic Argon Arc Welding

双相不锈钢空冷器管头自动氩弧焊焊接工艺

Control on Defects of Semi-automatic Submerged-arc Welding of Cylinder Tube

浅谈钢瓶筒体半自动埋弧焊焊接缺陷的控制

The Research of the Submerged-Arc Welding System Based on DSP2000

基于DSP2000的埋弧自动焊系统研究

Study on Property of Welded Joint by Le-wire Double and Sing-wire Automatic Submerged Arc Welding

双丝和单丝自动埋弧焊接头性能研究

Application of automatic argon tungsten-arc welding on large valve members

自动钨极氩弧焊在大型阀件上的应用

Automatic Rotating Argon Tungsten-Arc Welding of TA16 Titanium Alloy Conduit

TA16钛合金导管的自动钨极旋转氩弧焊